GlasGrid® 8512
GlasGrid is manufactured in the United States at our facility located in Albion, New York.
- GlasGrid is designed to reinforce asphalt concrete overlays, and help reduce reflective cracking for years to come.
- Superb product engineering in the grid configuration of fiberglass strands, coated with an elastomeric polymer. fiberglass is environmentally friendly and based on silica, a natural product.
- Each strand has a remarkably high tensile strength and high modulus of elasticity at low elongation. This combination of outstanding tensile strength and high modulus makes GlasGrid actually stronger than steel.
Product Specifications:
Specification For Use in Asphalt Overlays
|
8511
|
Imperial*
|
Metric**
|
Tensile Strength Based On Component Strand Strength
Test Method ASTM D 6637 |
Across Width
1120 lbs/in. x 560 lbs/in. |
Across Width
200 kN/m x 100 kN/m |
|
Elongation at Break
Test method ASTM D 6637
|
Less than 3% |
Less than 3% |
|
Melting Point
Test Method ASTM D 276
|
Greater than 425°F |
Greater than 218°C |
|
Mass/Unit Area
Test Method ASTM D 5261-92
|
16 oz/yd2 |
560 g/m2 |
| Roll Length† |
197 ft. |
60 m |
| Roll Width† |
5 ft. |
1.5 m |
| Roll Area† |
109 yd2 |
90 m2 |
| Adhesive Backing |
Pressure Sensitive |
Pressure Sensitive |
| Grid Size |
1 in x 0.75 in |
25 mm x 20 mm |
| Material |
Fiberglass reinforcement with modified polymer coating and pressure sensitive adhesive backing. |
* All imperial values are approximate.
** All metric values are nominal.
† Product is sold by the Roll.
|
